Vandy Vape Pulse AIO Pod Kit 80W

Vandy Vape Pulse AIO Pod Kit 80W

$70.39

Vandy Vape Pulse AIO Pod Kit gives all the DIY factors to bring you the fun of manual, which is boro compatible, and DIY RBA tanks work in most boro style modes. The mesh pre-made coil tank has the cu..

  • Ex Tax: $70.39
  • Product Code: M00000039
  • Availability: In Stock

Available Options

Vandy Vape Pulse AIO Pod Kit gives all the DIY factors to bring you the fun of manual, which is boro compatible, and DIY RBA tanks work in most boro style modes. The mesh pre-made coil tank has the curved airflow that is available for different sizes of the coil and supports both DIY and coil, press your coil into the tank, then open the plug to fill. The tank tends to be handier and lighter and set in the box-size kit. The adjustable positive pin can adjust the height of the positive table to fit the kit perfectly. Powered by a single 21700, 20700, or 18650 battery(with adapter) with a range of output that is up to 80W, it is admired that Pulse AIO considers all-around protection, such as temp control, voltage, bypass. Additionally, the USB type-c port provides reliable power and a faster speed to charge.

Note: The package and accessories may vary from batch to batch. All images are for reference purpose only.

Parameters:
Size: 53.6* 97.5* 28.2mm
Compatiable Battery: single  21700/20700/18650 (with adapter) battery(Not Included)
Power range: 5-80W

Operating Voltage: 3.2-4.2V
Charging Input Voltage: 5±0.25V
RBA Pod Capacity: 3.7ml
Pre-Built Pod Capacity: 5ml
Maxim Output Current: 32A
Resistance: 0.05-3ohm
Charging Current: 1000mAh
Charge Style: USB type-c port
Open circuit protection / over-current protection / 10 seconds cut-off / short circuit protection / over-temperature protection / low battery warming


Features:
- Powered by single 21700, 20700, or 18650 Battery with up To 80W output
- Boro compatible and tanks work in most Boro style mods
DIY RBA tank with curved airflow suitable for large or small coils
- Mesh Pre-made Coil Tank
Easy to customize button and plates
- Support Both DIY And Coil
- Adjustable Positive Pin
- Wattage,Temp Control, Voltage, Bypass

Packages:
1* Vandy Vape PULSE AIO Device
1* Vandy Vape PULSE AIO DIY Pod(RBA Tank)
1* Vandy Vape PULSE AIO Pod(Pre-Built Tank)
1* Wrench
2* VVC Coil
2* 24ga Ni80 Coil 0.4ohm
1* Accessory Bag
1* Coil lead guide
1* QC TYPE-C USB Cable
1* Instruction Manual
1* 18650 Battery Adaptor

Write a review

Note: HTML is not translated!
    Bad           Good